|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Bulletin PD-20583 rev. A 02/02 STPS1L30U SCHOTTKY RECTIFIER 1 Amp SMB Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM VF TJ @ tp= 5 ms sine @1.0Apk, TJ=125C range Description/Features The STPS1L30U surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Small foot print, surface mountable Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability STPS1L30U Units 1.0 30 360 0.30 - 55 to 150 A V A V C Device Marking: IR13L CATHODE ANODE 2.15 (.085) 1.80 (.071) 3.80 (.150) 3.30 (.130) 1 2 4.70 (.185) 4.10 (.161) 1 POLARITY 2 PART NUMBER 2.40 (.094) 1.90 (.075) 1.30 (.051) 0.76 (.030) 0.30 (.012) 0.15 (.006) 5.60 (.220) 5.00 (.197) 2.5 TYP. (.098 TYP.) SOLDERING PAD 2.0 TYP. (.079 TYP.) 4.2 (.165) 4.0 (.157) Outline SMB Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994 www.irf.com 1 STPS1L30U Bulletin PD-20583 rev. A 02/02 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) STPS1L30U 30 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current Non- Repetitive Avalanche Energy Repetitive Avalanche Current Value 1.0 360 75 9.0 1.0 Units Conditions A A 50% duty cycle @ TL = 106 C, rectangular wave form 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse mJ A TJ = 25 C, IAS = 0.8A, L = 10mH Following any rated load condition and with rated VRRM applied Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) Value 0.420 0.470 0.300 0.375 Units V V V V mA mA mA pF nH V/s @ 1A @ 2A @ 1A @ 2A TJ = 25 C TJ = 100 C TJ = 125 C Conditions TJ = 25 C TJ = 125 C IRM Max. Reverse Leakage Current (1) 0.2 5.0 15 VR = rated VR CT LS Max. Junction Capacitance Typical Series Inductance 200 2.0 10000 VR = 5VDC, (test signal range 100KHz to 1Mhz) 25C Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Storage Temperature Range (**) 80 C/W DC operation Value - 55 to 150 25 Units C C C/W DC operation Conditions Max. Junction Temperature Range (*) - 55 to 150 RthJL Max. Thermal Resistance Junction to Lead RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight Case Style Device Marking (*) dPtot 0.10(0.003) g (oz.) SMB IR13L Similar to DO-214AA 1 < thermal runaway condition for a diode on its own heatsink dTj Rth( j-a) (**) Mounted 1 inch square PCB 2 www.irf.com STPS1L30U Bulletin PD-20583 rev. A 02/02 10 T J = 125 C 10 Reverse C urren t - I R (m A) 1 100 C 75 C 50 C 0 .01 25 C 0.0 01 0.1 In sta n ta neous Forw ard C urrent - I F (A) 0 .00 0 1 0 T J = 125 C T J = 25 C 1 10 20 30 Reverse V olta ge - VR (V ) Fig. 2 - Typical Peak Reverse Current Vs. Reverse Voltage 1 0 00 Junc tion C ap a cita n ce - C T (pF) TJ = 25 C 10 0 0.1 0 0.2 0.4 0 .6 0 .8 Forw ard V oltage D rop - V FM (V ) 10 0 10 20 30 Reverse V oltag e - VR (V ) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage www.irf.com 3 STPS1L30U Bulletin PD-20583 rev. A 02/02 1 30 0.5 A vera ge Pow er Loss - (W a tts) DC D D D D D = = = = = 0.20 0.25 0.33 0.50 0.75 DC RM S Lim it 0.2 Allowable Lead Temperature (C) 1 20 0.4 1 10 D D D D D = = = = = 0.20 0.25 0.33 0.50 0.75 0.3 1 00 Squa re w ave (D = 0.50) 80% Ra ted VR a pp lied see note (2) 0.1 90 0 0 .4 0.8 1 .2 1 .6 0 0 0 .4 0 .8 1.2 1 .6 Average Forward Current - I F(AV) (A) Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature Averag e Forw ard C urrent - I F(AV ) (A ) Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current 1000 Non-Repetitive Surge Current - I FSM (A) 100 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 10 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com STPS1L30U Bulletin PD-20583 rev. A 02/02 Tape & Reel Information Dimensions in millimeters and (inches) Marking & Identification Each device has marking and identification on two rows. - The first row designates the device as manufactured by International Rectifier as indicated by the letters "IR", then the package label i.e. "G", Current and Voltage. - The second row shows the data code: Year and Week. See below marking diagram. FIRST ROW IR 1 3 L SECOND ROW Date Code YY WW Ordering Information STPS1L30U - TAPE AND REEL WHEN ORDERING, INDICATE THE PART NUMBER AND THE QUANTITY ( IN MULTIPLES OF 3000 PIECES). EXAMPLE: STPS1L30U - 6000 PIECES www.irf.com 5 STPS1L30U Bulletin PD-20583 rev. A 02/02 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02/02 6 www.irf.com |
Price & Availability of STPS1L30U |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |